TRW OEM Standard Disc Rotor

Introduction

When it comes to high quality and reliable brakes, there is one product that you can turn to which carries with it reputation and excellence, the TRW Brakes. As you can see, the TRW brand has been producing top quality braking technologies that ultimately provide effective deceleration and control of the vehicle dynamics under any weather or road condition, which is critical to the safety and the reliability of today's automobiles. This brand is known to offer components and systems, such as brakes, that will eventually assist drivers on the road when it comes to vehicle control, thus resulting to an enhanced driving security and comfort. The brakes are among the systems that you should be serious about, or a lot of inconveniences and dangers on the road can happen to you. The braking system is known to be a set of devices used for slowing down the motion of your vehicle and keeping it from starting to move again. So just imagine having a failing braking system on the road. Surely, your safety and that of the other people and drivers will be at risk. As a rule, always check your auto brakes before going off to a long trip just to be sure with your safety and to avoid other delays when driving. Take good care of this performancesystem, too, since it is one of the more abused systems in your vehicle, especially if you brake too hard or too fast. If you want to be sure, turn to a reliable provider of brakes such as the TRW brand. You are sure that this popular brand will not let you down with its highly reliable TRW Brakes; its performance will speak for itself.

TRW OEM Standard Disc Rotor

Rm150-400

>Terms and Conditions

HKS SSQV Blowoff Valve

Introduction

The HKS Super Sequential Blow-Off Valve (SSQV) is a dual stage pull-type relief valve. Unlike typical push type blow-off valves, the SSQV will not leak under any level of boost because the boost pressure in chamber "C" keeps the valve closed against its seat (Diagram 1). The SSQV releases excess boost when there is a pressure alteration in chambers "A & B", not by the rate of boost pressure or vacuum in the line. This ensures a quick valve response and complete closure during idle. Many competitors use a push-type blow-off valve design with a large valve to accommodate high boost / high horsepower applications. These large valves react slowly and require high pressure to open, and are not able to activate and prevent compressor surge at light-load conditions. On the other hand, smaller, fast reacting push-type valves do not discharge the airflow capacity required for high horsepower applications and tend to slowly open and leak as boost pressure overpowers the spring. For maximum performance, the HKS SSQV incorporates both a small primary valve for ultra quick activation, and a larger secondary valve for additional discharge capacity. The SSQV is engineered to initially open the small primary valve at light throttle and load conditions (Diagram 2), then sequentially opens the secondary valve for additional relief capacity under high boost and load conditions (Diagram 3). The SSQV is constructed of polished billet aluminum, which ensures long-term durability and a high luster look. The mounting base utilizes a circular mounting flange that combines with a C-clip snap ring and O-ring gasket to insure an excellent seal. The triple-fin discharge port design produces a powerful, unique and aggressive blow-off sound.

The HKS SSQV is available in vehicle specific kits or as a universal unit for custom applications. Vehicle specific HKS SSQV kits come complete with all mounting flanges, brackets, and miscellaneous hardware for an easy installation. For Universal SSQV applications, weld-on flanges are available in steel or aluminum for custom installation.

HKS SSQV Blowoff Valve (Limited Edition)

Rm850

>Terms and Conditions

Apexi Dual Funnel Power Intake Open Pod Filter

Introduction

Made in Japan

The Apexi Intake is a Dual funnel filter system which minimizes intake turbulence and minimalises air-flow restriction. The dual funnel Power Intake evolved from the highly successful Super Intake. Subtle refinements in the design and filter element resulted in a 10% reduction in pressure drop. Utilizing an upper and lower funnel, the Power Intake reduces air turbulence within the filter and creates smooth air flow into the throttle body. The Power Intake is a maintenance-free dry-type air filter and will alleviate the problem of filter oil from "wet" air cleaners interfering with the air-flow meter.

Apexi Dual Funnel Power Intake Open Pod Filter
Rm380

>Terms and Conditions

K&N High Flow Open Pod

Introduction
HIGH-FLOW AIR INTAKE SYSTEMS SINCE 1992
We feel a high quality performance intake system is one of the best dollars to horsepower investments you can make and once again K&N is the clearly defined leader. We built our first kit in 1992 and haven’t looked back since. We currently manufacture over 500 different part numbers and our team of engineers is designing, building and testing new systems constantly.

BOLT-ON HORSEPOWER GUARANTEED! K&N Performance Air Intake
Our systems are built for horsepower. In fact on the 2003 Ford Mustang SVT® we get an impressive 30 horsepower. If we can’t increase a car or truck's horsepower we won’t build a system for it. It’s that simple. We establish a stock baseline horsepower with our in house dynamometers and then design our air intakes to get the largest horsepower gain attainable without causing a "Check Engine Light" to come on. Our horsepower numbers are not based on the single biggest gain from one particular vehicle but are an average of runs and vehicles. Many times an identical vehicle will perform differently so we want to ensure repeatable numbers you can count on. In today’s market place there are some pretty big cold air intake claims. We don’t make claims; we present the facts, backed up by well documented tests.

HIGH-FLOW TECHNOLOGY
How do we increase horsepower so consistently? It all starts with The World’s Best Air Filter. Even a K&N replacement air filter is limited by the size of the original air box but once we remove the air box we’ve got plenty of room to work with. Now we can apply our High-Flow Technology to a large conical open element air filter, providing more surface area for huge increases in airflow that turn into horsepower you can feel. The oversize air filter also captures and holds more dirt. This increases the service life before a cleaning is required (up to 100,000 miles for air intakes depending on driving conditions).

K&N High-Flow Open Pod Filter
3Inch - Rm250
4Inch - Rm300
6Inch - Rm350

>Terms and Conditions

K&N High Flow Drop In Filter

Introduction
The Original High-Flow Air Filter
Since 1969 K&N Engineering has been designing, manufacturing, and enhancing High-Flow Air Filters for the automotive and motorcycle enthusiast interested in maximizing horsepower and acceleration. Since our humble beginnings we have designed and manufactured over 2,400 High-Flow Air Filters to fit most modern passenger vehicles and over 500 High-Flow Air Intake Systems to fit vehicles driven by enthusiast minded drivers. We not only have more applications than any other manufacturer of similar product, we invented the High-Flow category and the High-Flow Technology that supports it. K&N also makes thousands of racing and specialty type air filters and is the only air filter used at the Indianapolis 500 Race®.

The K&N FilterCharger® air filter is designed to achieve high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life. Our automotive OE (original equipment) replacement air filters generally add 1-4 horsepower. The secret to our success lies in the unique characteristics of our filter medium that was originally developed by K&N all those years ago in the dust, sweat and tears of desert motocross racing. We just wanted to win races and stumbled on a cotton filtration technology destined to be great. Our high flow cotton gauze air filter is washable, reusable and built to last for the life of an automotive or motorcycle engine. K&N air filters consist of four to six sheets of cotton gauze layered between two sheets of aluminum wire mesh. This media is then pleated and oiled to enhance its filtering capabilities and overall performance. K&N Air Filters were created for an environment requiring maximum horsepower and enhanced acceleration in addition to protection from the dirt and dust of off-road racing. The result is an air filter that allows dramatically more air into an engine, is washable and reusable, and will protect your engine for the life of your vehicle.

Features and Specifications:
-High Air Flow with Excellent Filtration
-Designed to Increase Horsepower and Acceleration
-Washable and Reusable
-Will NOT Void Vehicle Warranty
-Lasts up to 50,000 miles before cleaning is required depending on driving conditions
-K&N Million Mile Limited Warranty®
-Emissions Legal in all 50 US States.
-Economical, a K&N Air Filter Will Last the Life of Your Automobile, Motorcycle, or ATV
-Works with Original Equipment Manufacturer Vehicle Electronics
-Easy High Performance Add-on
-Environmentally Friendly

K&N High Flow Drop-In Air Filter
Rm240-350

>Terms and Conditions

Brembo Standard Disc Rotor

Introduction

Brembo Standard Disc Rotor

- Brand New Item
- Genuine Brembo Product Direct Import from Brembo Italy
- High Quality Long Lasting Material
- Precise Dimension for Plug and Play Application
- For Use On Stock Standard Brake System Only

Front
Perodua Myvi 1.0/1.3 - Rm380
Perodua Kancil - Rm350
Perodua Kelisa - Rm350
Perodua Kenari - Rm350

Proton Waja 1.6 - Rm330
Proton Perdana 2.0/V6 - Rm330
Wira/Satria 1.3 - Rm330

Rear
Waja 1.6 - Rm350

>Terms and Conditions

SARD Fuel Presure Regulator

Introduction

Made In Japan

SARD have been involved with Japanese Super GT for many years and the Sard/Denso Supra has achieved many victories.

The Sard fuel pressure regulator is used to reduce pressure variations caused by high flow fuel pumps and high flow injectors by dampening the pulses. This is performed by the light weight SARD diaphragm to provide more constant fuel pressures.

Designed to work with EFI engines, they are designed to provide the correct fuel pressure for high performance vehicles. Fuel pressure is adjustable from 200-800kpa. Easily performed using the 360 degree adjustment bolt.

Improves your engine room appeal with the brightly polished items machined from billet aluminum.

-Reduce fuel pressure spikes.
-Ensure fuel supply.
-Increase engine bay appeal.

Fuel Rail Adapter (Mitsubishi / Honda / Toyota / Nissan / Mazda) Check Link Below
>Click< SARD Fuel Presure Regulator
600bhp - Rm380
1200bhp - Rm720

>Terms and Conditions

TiAL Wastegates

Introduction
TiAL's line up of high performance, race proven Wastegates. TiALs Wastegates are trusted by the biggest names in the racing industry. With so much depending on the performance of the valve, its no mystery team leaders choose to equip their cars with the best.

WASTEGAT MV-S*38MM-BK TIAL WASTEGATE MVS RM890
38MM 1.0BAR*BLACK

WASTEGAT MV-S*38MM-BL TIAL WASTEGATE MVS RM890
38MM 1.0BAR*BLUE

WASTEGAT MV-S*38MM-P TIAL WASTEGATE MVS RM890
38MM 1.0BAR*PURPLE

WASTEGAT TIAL-38MM-BL TIAL WASTEGATE RM870
F38MM-0.7BAR *BLUE
0.7 BAR CAN BOOST

WASTEGAT TIAL-44MM-BL TIAL WASTEGATE RM1350
V44MM-1.0BAR *BLUE*
CA MUST BE 1BAR(44MM CA

WASTEGAT TIAL-44MM-P TIAL WASTEGATE RM1350
V44MM-1.0BAR *PURPLE*
CA MUST BE 1BAR(44MM CA

WASTEGAT TIAL-44MM-R TIAL WASTEGATE RM1350
V44MM-1.0BAR *RED*
CA MUST BE 1BAR(44MM CA

WASTEGAT TIAL-46MM-BK TIAL WASTEGATE RM1700
F46MM-1.0BAR* BLACK

WASTEGAT TIAL-46MM-P TIAL WASTEGATE RM1700
F46MM-1.0BAR* PURPLE

WASTEGAT TIAL-60MM-BK TIAL WASTEGATE RM1880
V60MM-1.0BAR* BLACK

WASTEGAT TIAL-60MM-P TIAL WASTEGATE RM1880
V60MM-1.0BAR* PURPLE

WASTEGAT TIAL38MM-1.0P TIAL WASTEGATE RM870
F38MM-1.0BAR *PURPLE*

WASTEGAT TIAL38MM-1.0R TIAL WASTEGATE RM870
F38MM-1.0BAR *RED*

>Terms and Conditions

Greddy Trust Full Auto Timer II

Introduction

Greddy full auto timer II

By separating the compact display and controls from the bulk of the unit allows for more mounting options. The 1meter cable that connects the two allows you to hide away the heart of the unit under the dash, while the controls and display can be easily mounted where convenient.
The simplified functions ensure efficient operation.

Besides being easier to mount, the new unit also includes mph or km/h Speedo and a Clock.




Greddy Trust Full Auto Timer II
Rm400

>Terms and Conditions

Bosch Aerotwins Wiperblades

Introduction

Made In Belgium

Be one of the first to own the latest wiperblades from Bosch

With the Aerotwin Bosch has redefined innovation with a design that combines optimal wiping efficiency with maximum convenience.

Features:
-Superbly effective, even at high speeds and under critical conditions
-Evodium flex rails custom-designed for ideal performance in each individual vehicular application.
-Balanced force distribution and optimal aerodynamics to clear every portion of the swept range with unexcelled efficiency
-Enhanced convenience
-Minimum wiper-induced wind noise thanks to reduction in aerodynamically exposed surface area
-Improved winter performance, with no ice formation on joints and metal frames
-Innovative plug-on connection for ultimate ease in blade replacement
-Innovative design from Bosch
-The perfect marriage of form and function
-Elegant and extremely planar styling replaces joints and frame braces
-Integral aerodynamic spoiler
-Custom-designed evodium flex rails for a perfect fit
-Extended service life
-Even distribution of application force inhibits uneven wear
-This balance also enhances resistance to insects and stubborn dirt
-Tried and tested Twin dual-component technology for wiper blades

Bosch Aerotwins Wiperblades Available size and pricing:
Bosch aerotwin wiperblades 14' - rm65.00/pcs
Bosch aerotwin wiperblades 16' - rm50.00/pcs
Bosch aerotwin wiperblades 17' - rm50.00/pcs
Bosch aerotwin wiperblades 18' - rm50.00/pcs
Bosch aerotwin wiperblades 19' - rm50.00/pcs
Bosch aerotwin wiperblades 20' - rm53.00/pcs
Bosch aerotwin wiperblades 21' - rm55.00/pcs
Bosch aerotwin wiperblades 22' - rm55.00/pcs
Bosch aerotwin wiperblades 24' - rm60.00/pcs
Bosch aerotwin wiperblades 26' - rm60.00/pcs
Bosch aerotwin wiperblades 28' - rm65.00/pcs

>Terms and Conditions