K&N High-Flow Open Pod Filter

K&N High-Flow Open Pod Filter

HIGH-FLOW AIR INTAKE SYSTEMS SINCE 1992
We feel a high quality performance intake system is one of the best dollars to horsepower investments you can make and once again K&N is the clearly defined leader. We built our first kit in 1992 and haven’t looked back since. We currently manufacture over 500 different part numbers and our team of engineers is designing, building and testing new systems constantly.

BOLT-ON HORSEPOWER GUARANTEED! K&N Performance Air Intake
Our systems are built for horsepower. In fact on the 2003 Ford Mustang SVT® we get an impressive 30 horsepower. If we can’t increase a car or truck's horsepower we won’t build a system for it. It’s that simple. We establish a stock baseline horsepower with our in house dynamometers and then design our air intakes to get the largest horsepower gain attainable without causing a “Check Engine Light” to come on. Our horsepower numbers are not based on the single biggest gain from one particular vehicle but are an average of runs and vehicles. Many times an identical vehicle will perform differently so we want to ensure repeatable numbers you can count on. In today’s market place there are some pretty big cold air intake claims. We don’t make claims; we present the facts, backed up by well documented tests.

HIGH-FLOW TECHNOLOGY
How do we increase horsepower so consistently? It all starts with The World’s Best Air Filter. Even a K&N replacement air filter is limited by the size of the original air box but once we remove the air box we’ve got plenty of room to work with. Now we can apply our High-Flow Technology to a large conical open element air filter, providing more surface area for huge increases in airflow that turn into horsepower you can feel. The oversize air filter also captures and holds more dirt. This increases the service life before a cleaning is required (up to 100,000 miles for air intakes depending on driving conditions).

THE WORLD’S FIRST MILLION-MILE LIMITED WARRANTY
K&N invented the world’s first air filter guaranteed for one million miles. That same warranty applies to our High-Flow Air Intake Systems. Our products are well engineered, built with the finest materials and we stand behind them 100%. View our >warranty page<

EASY INSTALLATION
Sound complicated? That’s the great part, our air intake systems are easy to install. A typical installation can be done with a screwdriver, pliers and a ratchet-set in 90 minutes or less! We specifically engineer our kits to use existing factory holes and mounting points, making installation simple. The vast majority of our cold air intakes do NOT require any cutting or drilling.

RC-3250 (3.125in/79mm Inlet)
- Base Outside Diameter: 5 in (127 mm)
- Top Outside Diameter: 3.5 in (89 mm)
- Hole Inside Diameter: 3.125 in (79 mm)
- Hole Length: 0.75 in (19 mm)
- Filter Height: 6 in (152 mm)

RC-3600 (4in/102mm Inlet)
- Base Outside Diameter: 5.375 in (137 mm)
- Top Outside Diameter: 4.5 in (114 mm)
- Hole Inside Diameter: 4 in (102 mm)
- Hole Length: 0.625 in (16 mm)
- Filter Height: 5 in (127 mm)

RC-2960 (6in/152mm Inlet)
- Base Outside Diameter: 7.5 in (191 mm)
- Top Outside Diameter: 5 in (127 mm)
- Hole Inside Diameter: 6 in (152 mm)
- Hole Length: 1 in (25 mm)
- Filter Height: 5 in (127 mm)

K&N High Flow Open Pod Filter
3inch - Rm250
4inch - Rm280
6inch - Rm310

>Terms and Conditions



K&N Recharge Cleaner Kits

A six-step maintenance system designed to recharge any K&N Filter charger® Air Filter. Restores air flow efficiency so your Filtercharger performs like new!

K&N Recharger Cleaner Kits
Rm70

>Terms and Conditions