Thursday, March 14, 2013

Project Mu Bestop Brake Pad (0-350'c)

Project Mu Bestop is designed as an improved road pad, better temperature and friction capabilities than standard OEM pads with the same low noise & dust characteristics. Use this if you are occasional spirited driver. Pricing is comparable with OEM replacements brake pad and performance is improved.

Features & Benefits:
Fade Resistance - When brake pads operate at high temperatures, high pressure gases can be created in the pad and can cause a 'gas layer' between the pad and rotor. This can make the driver feel like the brakes have lost performance as the brake pedal feels the same, but the car won't slow down as normal. This phenomenon is known as 'fade'. A slot is manufactured in all Project-Mu pads to offer the gases an escape route.
*Rotor slots also assist to provide the same solution.

Noise Suppression - Brake pads manufactured without a chamfer on the leading edge of the friction material, are more likely to produce unpleasant noise. This noise known as brake squeal is actually a high frequency vibration created by the friction between pad and rotor. The vibration can manifest in caliper, rotor or suspension vibration. This 'problem' is reduced or eliminated by the chamfer on the pad material.
*Brake squeal is more likely to occur in some models, and not others. It can also depend on the condition of the car.  

Heat Treatment - Project-Mu brake pads are subjected to heat treatment as part of the manufacturing process. This process 'burns out' unwanted materials in advance, reducing the gases that can cause fade. As a result, Project-Mu brake pads only need light 'bedding in' to match the pad to your rotor surface.

Brake Pad Structural Stability - Brake pads are subjected to huge pressure from caliper pistons in unequal proportions across the pad. Brake pads must remain flat to offer optimal performance so Project-Mu use only the highest grade quality steel at the correct thickness to ensure this stability. Project-Mu pads are up to 20% stronger than some competitors.

Project Mu Bestop Brake Pad (0-350'c)
Accord CM 2003-2007' (FRONT) - F304
Accord CM 2003-2007' (REAR) - R389
Accord CP 2008-2013 (FRONT) - F304
Accord CP 2008-2013 (REAR) - R389

City GM 2009-2013' (FRONT) - F398 or PMA 1286
City GM 2009-2013' (REAR) - PMA1163
City GM6 2014'+ (FRONT) - F398 or PMA 1286
City GM6 2014'+ (REAR) - PMA1163

Civic EK VTEC 1996-2000' (FRONT) - F398 or PMA 1286
Civic EK9 Type R 1996-2000' (FRONT) - F333 or PMA 1206
Civic ES/ET 2001-2005' (FRONT) - F398 or PMA 1286
Civic FN2 Type R (REAR) - R394
Civic FD 1.8/2.0 2006-2011' (FRONT) - F304
Civic FD 1.8/2.0 2006-2011' (REAR) - R389
Civic FB 1.8/2.0 2012-2015' (FRONT) - F304
Civic FB 1.8/2.0 2012-2015' (REAR) - R389

Integra DC2 Type R

Jazz GE 2008-2013' (FRONT0 - F398
Jazz GK 2014'+ (FRONT) - F398

3 BL 2009-2012' (FRONT) - PMA 8266
3 BM 2013+ (FRONT)
5 Premacy 2010-2015' (FRONT) - PMA 8266
6 GJ 2013+ (FRONT) - PMA 8549

Myvi LagiBest 1.3/1.5 (FRONT) - PMA 8537
Myvi Icon 1.5 (FRONT) - PMA 8537

Swift ZC21 1.5 2005-2012' (FRONT) - F890
Swift ZC31S 2008-2012' (FRONT) - F890

Vios NCP150 J/E (Rear Drum) - PMA 8560

No.41, Jalan Metro Perdana Barat 11, Sri Edaran Kepong, 52100 K.L
GPS (3.21788, 101.639388)
10.00am-7.00pm, Lunch Hour 1.00pm-2.00pm (Monday-Saturday)

+60 19 266 8138 (WhatsApp)

>Terms and Conditions

No comments:

Post a Comment


Designed specifically for the performance enthusiast, NGK Iridium IX plugs offer extreme ignitability, improved thro...